We recommend that the grinding machine be checked regularly to extend the service life.During the maintenance and repair process, the power of the grinder must be disconnected.Use protective equipment such as safety shoes, protective gloves, protective masks,etc. How to clean the grinder?

1.Cleaning switch

Grinding machine works on site for a long time, and the switch will inevitably run into the dust. For this reason, you should check switch after grinding, to see whether the part is clogged by dust, resulting in switch failure.

2.Cleaning the disc cover

Remove the vacuum tube connection, illuminate the dust nozzle with a flashlight, clean the dust nozzle with brush. So that it will not clog the dust nozzle and affect dust collection efficiency.

3.Cleaning the disc conversion block

Tilt the machine and use a cross screwdriver to remove the pads, and use shovel to remove dust. If you do not clean up in time, it is possible to make the pads disconnect well, and pads fly out when grinding, causing damage to the machine and threaten personal safety.

Note:

1.Be sure to unplug the plug from the outlet and then clean, maintain, or assemble it.

2.Be sure to clean the entire equipment after the end of the day. Do not use a high pressure cleaner to clean the machine directly.